Display stand 00271

Display stand 00271. Digital files for manufacturing products on a laser machine (co2 or diode laser).

A display stand for minifigures and other items can be used for any collection. The minimum working area of ​​the laser machine should be at least 350 x 260 mm – this is the size of the largest part. The acrylic parts are currently only 3 mm thick, but I can adjust this at your request. Assembly is fairly simple, taking literally 5 minutes, but there’s a lot of engraving, so it will take about 1-2 hours. For the acrylic, I used a quick cut (only contour cutting at high speed and low power).

Suitable for minifigures up to 50mm tall, but taller figures will fit perfectly on the top shelf.

• length: 350mm / 13.77″ (external)
• width: 144mm / 5.67″ (external)
• height: 260mm / 10.23″ (external)
• acrylic shelf size: 314x105mm / 12.36×4.13″
• distance between shelves: 50mm / 1.96″

kerf (cut compensation): 0.15mm and 0
design available for plywood thickness: 3mm, 1/8inch (3.175mm), 3.6mm, 3.8mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 1/4inch (6.35mm)
acrylic construction: 3 mm. I can make adjustments and add other thicknesses upon request.
digital product includes: CDR, SVG, PDF, AI

ATTENTION! This is not a physical product, these are digital files for manufacturing products on a CNC laser machine. While using this file, you can create finished product for own or commercial use. Resale of digital files and their distribution is prohibited.