Card box 00214

Card box 00214.

Digital files for manufacturing products on a CNC LASER machine.

The box is suitable for double sleeved cards. The box has a display for installing a card, this is a separate compartment 1mm thick and is suitable for one card that will be visible from the outside of the box. According to my calculations, it holds about 100 cards. Production time 10 minutes. Minimum material. To make it you will need a little glue and 2 round magnets 3 by 3 mm.

length: 75mm / 2.95″ (internal)
width: 65mm / 2.55″ (internal)
height: 98mm / 3.85″ (internal)

for a magnetic lock: 3×3 mm round magnets. 2 magnets.

kerf (cut compensation): 0.15mm and 0
design available for plywood thickness: 3mm, 1/8inch (3.175mm), 3.6mm, 3.8mm, 4mm, 4.5mm, 5mm
digital product includes: CDR, SVG, PDF, AI

ATTENTION! This is not a physical product, these are digital files for manufacturing products on a CNC laser machine. While using this file, you can create finished product for own or commercial use. Resale of digital files and their distribution is prohibited.