Card & dice box p022. Parametric model: you set the sizes and the plywood thickness right here on the page, and the generator makes laser cut files (co2 or diode laser) for exactly your box.
A storage box for tabletop games: card decks stand upright in the top compartment under a hinged lid, dice and small accessories go into the pull-out drawers below. Every change is shown at once in the 3D preview, all joints and slots are recalculated automatically.
What you can set:
- card columns: 1–4, column width 45–160mm / 1.77–6.30" (inner)
- card compartment height: 75–220mm / 2.95–8.66" (inner)
- box depth: 60–200mm / 2.36–7.87" (inner)
- drawers: 1–3 rows, each row with its own height 22–120mm / 0.87–4.72" and its own number of drawers (one long drawer, two, three...), or open shelves without drawers
- lid: wooden pivot or strong knuckle hinges with nail pins, lid height adjustable
- closure: none, magnet (any diameter) or a hinged clasp
- plywood thickness: any value from 3mm to 6.35mm (1/4inch), e.g. 3mm, 1/8inch (3.175mm), 3.6mm, 3.8mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 1/4inch (6.35mm)
The outer size is shown in the generator while you change the settings.
kerf (cut compensation): 0.15mm and 0, both versions in the archive
digital product includes: ZIP with SVG files, readme
Attention:
This is not a physical product, these are digital files for manufacturing products on a CNC laser machine. While using this file, you can create finished product for own or commercial use. Resale of digital files and their distribution is prohibited.
