Zombie Book 00272 A6 + A5. Digital files for manufacturing products on a CNC laser machine (co2 or diode laser).
Are you brave enough to open this one? I'm excited to share the new Zombie Book 00272 project! This isn't just a box; it's a character in itself. I put a lot of work into the texture engraving to make it look like old, gnarled skin (or wood that's come alive!).
Assembly is simple, but there's a lot of engraving that takes time. I spent a long time thinking about what color to paint it, and eventually settled on a classic tint )) but I think a green tint would be even better. You can use an airbrush here, but I just used a brush and a bit of a drill, of course.
1. A6
- length: 105mm / 4.13" (internal)
- width: 148.5mm / 5.84" (internal)
- height: 35mm / 1.37" (internal)
2. A5
- length: 160mm / 6.29" (internal)
- width: 210mm / 8.26" (internal)
- height: 40mm / 1.57" (internal)
for magnetic lock: 2 (a6 vercion) or 4 (a5 version) rounded magnets 3x3mm
The size of the magnet should not exceed the thickness of the material. The magnet hole diameter can be edited in any vector editor. Installation of magnets is optional.
kerf (cut compensation): 0.15mm and 0
design available for plywood thickness: 3mm, 1/8inch (3.175mm), 3.6mm, 3.8mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 1/4inch (6.35mm)
digital product includes: CDR, SVG, PDF, AI
Attention:
This is not a physical product, these are digital files for manufacturing products on a CNC laser machine. While using this file, you can create finished product for own or commercial use. Resale of digital files and their distribution is prohibited.
