Jewelry box 00279

Jewelry box 00279. Digital files for manufacturing products on a laser machine (co2 or diode laser).

This box is made in the same style as two others I already have in my store: 00133 and 00128. The interior is smooth and has no protrusions. I added two boxes for organization. You can also add magnets to the lid, although this is optional, but it’s an option. The lid is also easily customizable. I added an iris design to the center using sublimation.

length: 240mm / 9.44″ (internal)
width: 173mm / 6.81″ (internal)
height: ~33mm (base) + ~18mm (lid) / ~1.29″ (base) + 0.7″ (lid) (internal)

For magnetic lock (optional): 4 magnets 3x3mm. You can change the size in any vector editor.
Engraving depth for magnets should be equal to the thickness of the magnet.

kerf (cut compensation): 0.15mm and 0
design available for plywood thickness: 3mm, 1/8inch (3.175mm), 3.6mm, 3.8mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm
digital product includes: CDR, SVG, PDF, AI

——————————————–
Lid picture:
Transferred by sublimation. You need a sublimation printer + thermopress.
Apply a little clear acrylic varnish to the plywood. Transfer the picture
for 90 seconds at 180 degrees Celsius, medium pressure. After heating,
the plywood may deform – after assembly, this problem will disappear.

ATTENTION! This is not a physical product, these are digital files for manufacturing products on a laser machine. While using this file, you can create finished product for own or commercial use. Resale of digital files and their distribution is prohibited.