Halloween box 00219

Halloween box 00219. Digital files for manufacturing products on a CNC LASER MACHINE.

A simple gift box. There are 2 versions in the archive, one with a wooden texture, the second for quick engraving. It took about 30 minutes to cut and engrave the version in the photo. If you arrange the fibers parallel to the X axis, this will greatly speed up the engraving. It all comes together in 5 minutes.

Before cutting, the plywood for the pumpkin and the second layer (they are marked inside the file) can be pre-painted orange and black, that’s what I did. I cut, assembled and applied black acrylic paint diluted with water. Then a little sanding and a second coat of paint.

length: 100mm / 3.93″ (internal)
width: 75mm / 2.95″ (internal)
height: 165mm / 6.49″ (internal)

kerf (cut compensation): 0.15mm and 0
design available for plywood thickness: 3mm, 1/8inch (3.175mm), 3.6mm, 3.8mm, 4mm, 4.5mm, 5mm
digital product includes: CDR, SVG, PDF, AI

ATTENTION! This is not a physical product, these are digital files for manufacturing products on a CNC laser machine. While using this file, you can create finished product for own or commercial use. Resale of digital files and their distribution is prohibited.